Field of Application
General construction, light and heavy duty machinery, scaffolding, pilling, fencing, furniture

Production Standards
EN 10219 Part 1&2, EN 10305 Part5
DIN 2395, DIN 1615 / 2458, DIN 17120, DIN 59411
BS 6363, BS 6323, BS 1139
ASTM A 500, ASTM A 513, ASTM A 252
IS 1458

Steel Grades
E 195 – E 235 – E 275 – E 355 acc. to EN 10027-1
S 235/ S 275/ S 355 acc. to EN 10025
St. 37.2/ St. 44.2/ St. 52.3 acc. to DIN 17100
Gr A / B / C acc to ASTM A 500
S235JRH / S275JOH / S275J2H
S355JOH / S355J2H acc. to EN 10219-1

Sizes
Square & Rectangular Hollow Sections
Sizes :
10×10 – 400×400 mm 10×20 – 500×300 mm 3/ 4″x3/ 4″ – 16″ x16″
Wall Thickness :
0.60 mm – 12.50 mm  0.063″ – 0.500″
Circular Hollow Sections:
Sizes:
10 mm – 406.4 mm
Wall Thickness:
0.60 – 12.50 mm

Length
Supplied in 6 and 12 meter lengths unless otherwise specified
Length Tolerance:
-0 / +50 mm for mill lengths   + / – 1 mm for cut lengths

Surface Conditions
Uncoated or protected with oil

End Finishing
Square cut or bevelled

Marking
On pipe: Paint marking
On bundles: information Tags

Packing
In bundles fastened with steel straps if required to be supported with wooden dunnages, bare or wrapped in p.p woven fabric / paper (VCI protection upon request) permanent lifting slings, steel or cloth applicable upon request

Tests Performed
Visual Dimensional Inspection Destructive Tests:
Tensile Test, Flattening Test, Flaring Test, Expansion Test, Impact Tests
Non-Destructive Test: (Eddy Current)
Metallographic Examination
Chemical Analysis of Raw Material

Mill Certificates
Issued upon request according to EN 10204
2.1; 2.2; 3.1